Low stock: 1 left
Unbranded
Trampoline Mat 12 Foot 72 Ring Replacement w/ Pull Hook Gloves 5.5-7 Inch Spring
Trampoline Mat 12 Foot 72 Ring Replacement w/ Pull Hook Gloves 5.5-7 Inch Spring
Couldn't load pickup availability
- Trampoline Pro and SkyBound 12ft mats run $70-120 at Amazon — get this 10-row-stitched 72-ring equivalent here for under $55.
- Memorial Day is around the corner — replace your kids' trampoline mat NOW before summer jumping season starts in earnest.
- Pull-hook tool and gloves included for safer install — pre-listing 7-point inspection verified all 3 components and stitching quality.
Spring trampoline-repair season is NOW — get your kids back
jumping safely with this 10-row-stitched 72-ring replacement mat for any 12ft
frame, with pull-hook + gloves included for fast installation before Memorial
Day.
This is a BEEYER trampoline replacement jumping mat for any
12-foot round trampoline frame using 72 V-rings and springs in the
5.5"-7.0" length range. The mat itself is constructed from
UV-resistant, anti-tear weave with 10 rows of high-strength stitching at the
V-ring attachment points — vs the 8-row "basic tier" found on budget
mats. Stitching is the #1 failure point on trampoline mats; the 10-row
construction is the buyer-meaningful differentiator within the aftermarket
category. Each V-ring is welded zinc-coated steel, attached to the perimeter
with reinforced polyester webbing. The mat is sized to a circular cut that
matches the inside diameter of a standard 12ft round frame when fully tensioned
by your existing springs. Compatible with most 12ft / 72-ring /
5.5"-7" round trampolines including Skywalker, JumpKing, Bouncing
Pro, SportsPower / BouncePro, Upper Bounce, Parkside, and many other 12ft
round-frame brands. INCLUDED accessories: pull-hook installation tool
(stainless steel, leverage pull for hooking the mat V-rings onto the frame
springs), and a pair of work gloves for handling spring tension safely. SPECS
verification BEFORE you buy: (1) Frame diameter — measure across the outer
steel frame; should be 12 feet (~144 inches). (2) V-ring count — count the
springs on your existing trampoline; this number = ring count required. Should
be 72 to match this mat. (3) Spring length — remove one spring and measure
hook-to-hook when resting (no tension); should fall within 5.5" to
7.0" range.
Key Features
•
12ft Frame Compatible — 72 V-Rings,
5.5"-7" Spring Range → Fits any 12-foot round trampoline frame
using 72 V-rings (count your springs to confirm) and springs in the 5.5"
to 7.0" length range. Compatible with most 12ft Skywalker, JumpKing,
BouncePro, SportsPower, Upper Bounce, Parkside, and similar.
•
10 Rows of Stitching — Premium-Tier Aftermarket
Construction → 10 rows of high-strength stitching at the V-ring attachment
points vs the 8-row "basic tier" on budget mats. Stitching is the #1
failure point on trampoline mats; 10 rows is the buyer-meaningful
differentiator.
•
UV-Resistant + Anti-Tear Woven Fabric → UV-stabilized
polypropylene weave resists sun fading and degradation through multiple summer
seasons. Anti-tear construction handles standard kid + adult jumping use.
•
Welded Zinc-Coated V-Rings + Reinforced Webbing → Each
V-ring is welded zinc-coated steel attached to the mat perimeter with
reinforced polyester webbing. Zinc coating resists rust through outdoor
seasons.
•
Pull-Hook Tool + Gloves Included — Safer
Installation → Stainless-steel pull-hook leverage tool helps hook V-rings
onto frame springs during installation. Work gloves protect hands from spring
tension. Both included so buyer doesn't need to source separately.
•
Spring Repair Season — Order Now Before Memorial Day
→ April-May is peak trampoline-repair season — homeowners uncovering
backyard trampolines find degraded mats and need replacements before summer
kid-jumping season. Order now to install before Memorial Day weekend.
•
MAT ONLY — Frame, Springs, Net NOT Included → This
listing is the jumping mat surface only. Buyer reuses existing 12ft frame,
springs, and any safety enclosure net. NOT a complete trampoline kit.
Product Specifications
•
Brand: BEEYER
•
Type: Replacement Trampoline Jumping Mat
•
Frame Compatibility — Diameter: 12 ft round (144
inches outer frame)
•
Frame Compatibility — V-Ring Count: 72 (verify
by counting springs on existing trampoline)
•
Frame Compatibility — Spring Length Range: 5.5"
to 7.0" hook-to-hook (resting measurement)
•
Mat Diameter (Approximate): ~127 inches (varies
by configuration; verify with tape measure when received)
•
Stitching Rows: 10 rows (premium-tier
construction)
•
Mat Material: UV-resistant, anti-tear woven
polypropylene
•
V-Ring Material: Welded zinc-coated steel
•
V-Ring Attachment: Reinforced polyester webbing
•
Pieces Included (3 total): Replacement mat,
pull-hook installation tool, work gloves
•
NOT Included: Frame, springs, safety enclosure
net, padding, ladder
•
Compatible Trampoline Brands: Most 12ft /
72-ring / 5.5"-7" round trampolines: Skywalker, JumpKing, BouncePro,
SportsPower, Upper Bounce, Parkside, and similar
•
Installation: Adult installation recommended;
pull-hook + gloves included
•
Use Cases: Replacement for damaged/UV-degraded
mat on existing 12ft trampoline frame
• Country of Manufacture: China
• Condition: New
Share
