CIPU 0.35HP 2700GPH Pool Pump Built-In Timer 115V Above Ground Self Priming New

• A pool without a working pump cannot stay chemically balanced. Algae blooms begin in as little as 48–72 hours without circulation in warm weather. 
• Running a pool pump 24/7 at 115V/3.6A draws approximately 414 watts continuously. At the US average electricity rate of $0.16/kWh, that is $1.59/day or $47.76/month in electricity — just for the pump. Running it 8 hours per day (the typical adequate circulation for most pools) cuts that to $15.92/month. The built-in timer enables this instantly. Over a 5-month pool season, the timer saves approximately $160 in electricity vs. running continuously. This pump effectively pays for itself through energy savings in a single season.
• Above-ground pool plumbing comes in two standard sizes — 1-1/4" and 1-1/2". Most replacement pumps require buyers to figure out which they have, measure, and either drive to the hardware store or order adapters separately. This pump includes both adapter sizes in the box. That is two fewer decisions, two fewer potential order errors, and two fewer steps between 'order placed' and 'pool running.' 
  
  

Your pool pump stopped working. Or the season is starting and you're done babysitting the timer every morning. Either way, the CIPU CSPP717 solves both problems in one box. This 0.35HP, 2700GPH above-ground pool pump has the timer built in — set it once for 2 to 24 hours, and it runs your pool on schedule every day without you touching it. No separate timer purchase, no inline wiring, no extra hardware. New in original packaging.

The Built-In Timer Advantage — What You're Not Paying For Separately

Is This Pump Right for Your Pool?

The CSPP717 delivers 2,700 GPH (45 GPM) flow rate at 0.35HP. As a general guideline:

•    Ideal for: Above-ground pools up to approximately 10,000–15,000 gallons running a standard cartridge or sand filter system. Excellent for smaller backyard above-ground pools (15'–18' round, 12'×24' oval).

•    Also suitable for: Hot tubs, spas, and above-ground water feature circulation systems requiring 115V standard residential power.

•    Not ideal for: Large in-ground pools, pools over 20,000 gallons, or applications requiring 230V power or high-pressure multi-directional flow. In-ground pools typically require 1HP+ and 230V motors.

•    Turnover rate: At 2,700 GPH, a 10,000-gallon pool completes one full water turnover in approximately 3.7 hours — within the recommended 6–8 hour daily circulation window with a 2× turnover per day.

Key Features

•    Built-In 24-Hour Programmable Timer: Set the pump to run automatically for 2, 4, 6, 8, 12, or up to 24 hours. The pump starts and stops on your schedule without manual intervention. Eliminates the need for a separate external timer — no additional hardware, no inline wiring project, no extra cost.

•    2,700 GPH Self-Priming Motor: The self-priming design pulls water up from the pool inlet without manual priming — press start and the pump draws water automatically. 2,700 GPH (45 GPM) at 0.35HP provides effective circulation for standard residential above-ground pool setups.

•    Transparent Strainer Basket Lid: The clear lid lets you see the strainer basket level without opening the pump housing. Empty it before it gets full — a partially blocked strainer reduces flow and increases motor load. The extra-large basket catches leaves, debris, and hair before they reach your filter.

•    Whisper-Quiet Operation: Engineered for low-noise operation compared to older single-speed pool pumps. Runs at a noise level appropriate for residential settings without disturbing neighbors or patio conversations.

•    Universal Above-Ground Adapter Fittings: Includes both 1-1/4" and 1-1/2" threaded adapter fittings in the box. Fits the two most common above-ground pool plumbing standards — plug-and-play replacement for most existing above-ground filter systems without a hardware store run.

•    115V Standard Residential Power: Plugs into a standard outdoor GFCI outlet. 6-foot cord included. No special wiring, no 230V circuit, no electrician required for installation.

•    Specifications: Model: CSPP717 | HP: 0.35 | Flow Rate: 2,700 GPH (45 GPM) | Voltage: 115V AC | Amperage: 3.6A | Cord: 6 ft | Dimensions: 16.5"L × 5.9"W × 9.2"H | Weight: ~11 lbs | Includes: 1.25" and 1.5" adapters

Order today from E-bayond Expectations LLC. Pool season won't wait — ships fast. Click "Buy It Now" to get your pool circulating cleanly and on schedule from day one.